INJECTION HOSE INSTALLATION IN BELFAST
Free site survey, a written diagnosis and a fixed, itemised quotation — for concrete structures requiring crack repair systems across the Belfast area
Belfast sites come to us with concrete structures requiring crack repair systems that have started to fail. The survey establishes why before anything is specified, and the written diagnosis goes to you with photographs.
How the Work Is Carried Out
Our operatives hold NVQs in resin and grout injection, CSCS, SSSTS and SMSTS cards, PASMA and MEWP (3a/3b) training, and are confined-space trained. That matters on industrial sites across County Antrim, where access and permits usually dictate the method as much as the defect does. Sika-approved products throughout.
Areas We Cover
And across County Antrim
Why Choose MPS?
Injection Hose Installation Methods & Systems
We install specialist injection hose systems for crack repair, curtain grouting, and structural strengthening using resin injection technology.
Passive Injection Hoses
Pre-installed hose systems embedded in cracks that activate when water pressure occurs, automatically injecting resin to seal leaks without manual intervention in inaccessible areas.
Active Injection Systems
Pressure-controlled injection hose networks for systematic crack sealing, allowing staged resin injection into multiple cracks from a single pump system with precise flow control.
Curtain Grouting Hoses
Tube-à-manchette (TAM) systems for creating waterproof resin curtains in soil or rock, used for tunnel waterproofing, dam repairs, and foundation stabilisation applications.
Crack Stitching Integration
Combined crack stitching and injection hose systems that structurally reinforce cracks while simultaneously sealing them with epoxy or polyurethane resins.
Flexible Resin Delivery
Multi-port injection hose manifolds allowing sequential or simultaneous resin delivery to multiple crack locations, optimising injection efficiency in large-scale repairs.
Monitoring & Testing
Pressure monitoring systems integrated with injection hoses to verify complete resin penetration, detect flow resistance, and confirm structural bond quality during injection.
Injection Hose Installation Process
Crack Mapping & Planning
Cracks are mapped, depth assessed, and injection hose layout designed to ensure complete resin coverage. Hose spacing and port locations determined based on crack characteristics.
Hose Installation
Injection hoses are surface-mounted along crack lines or embedded into drilled channels, secured with quick-set adhesive, and connected to injection ports or manifolds.
Resin Injection
Low-viscosity epoxy or polyurethane resin is pressure-injected through hoses, flowing through valves or porous sections into cracks until complete saturation is achieved.
Curing & Removal
After resin cures (24-48 hours), surface-mounted hoses are cut flush, embedded hoses remain in place, and surfaces are finished to match existing concrete appearance.
Frequently Asked Questions
When is injection hose installation necessary?
Injection hoses are used for deep cracks, inaccessible locations, cracks requiring systematic multi-point injection, curtain grouting applications, or where passive systems that activate automatically when water pressure occurs are required. They're essential for complex structural crack repairs where standard surface injection may be insufficient.
What's the advantage of injection hoses over standard crack injection?
Injection hoses allow resin delivery deep into cracks from multiple points, ensuring complete penetration in thick sections. They enable systematic injection along entire crack lengths, work in inaccessible areas, and passive systems can seal future water ingress automatically without further intervention.
How much does injection hose installation cost?
Costs vary based on crack length, depth, accessibility, hose type (passive/active), and resin volumes required. Injection hose systems typically cost £800-£2,500 for residential crack repairs, with larger commercial projects priced per linear metre. The additional cost over standard injection is justified by superior penetration and reliability.
Can injection hoses seal cracks that are still moving?
Yes, when using flexible polyurethane resins through injection hoses, the system can accommodate minor crack movement while maintaining waterproof integrity. Passive injection hoses are particularly effective as they automatically inject resin when crack movement causes water pressure, creating self-healing characteristics.
Are injection hoses left in the structure permanently?
This depends on installation method. Surface-mounted hoses are typically removed after injection and cut flush. Embedded hoses in drilled channels or passive systems remain in place permanently, encapsulated in resin and invisible once surfaces are finished. Both approaches provide permanent structural crack sealing.
Concrete in Belfast: Ground, Water and Exposure
Belfast city centre and the docks are built on sleech, a soft estuarine clay up to 20m thick that is the reason so many of the city's buildings are piled, with glacial till on the higher ground either side of the Lagan. Groundwater in the sleech is at or near the surface.
Belfast Lough puts the docks and the lower city in marine airborne-chloride exposure (XS1), and the mild, wet climate keeps concrete damp for most of the year, which drives corrosion once chlorides are in. Freeze-thaw (XF) is less severe than in northern England.
For injection hose it sets the stakes. A construction joint below a permanent water table will be tested the day the excavation is backfilled, so the hose is the maintainable detail that lets the joint be grouted later without breaking out; in free-draining ground it is insurance rather than certainty.
Exposure classes are those in BS 8500-1 and BS EN 206 (XC carbonation, XD de-icing chlorides, XS marine chlorides, XF freeze-thaw); ground descriptions follow British Geological Survey mapping. The survey confirms which applies to your structure.
Standards, Credentials & Documented Work
What you can check before appointing us.
Standards that govern this work
- BS 8102:2022 — detailing of construction joints in Type B (structurally integral) protection
- BS EN 1504-5 — the injection resins and grouts used to seal the hose after the pour
Who does the work
MPS Concrete Solutions was founded in 2013 and works from Gamlingay, Cambridgeshire (SG19 3JW). Our operatives hold NVQs in resin and grout injection, CSCS, SSSTS and SMSTS cards, and PASMA and MEWP (3a/3b) training, and are confined-space trained.
- Constructionline Gold member; SSIP accredited
- UKAS-accredited certification to ISO 9001, ISO 14001 and ISO 45001
- Concrete Repair Association (CRA) member
- Sika-specified applicator
How we get to Belfast
From our yard at Gamlingay in South Cambridgeshire, Belfast is reached by road and sea crossing. Planned as continuous visits with plant and materials shipped to site. Multi-site portfolios are the work this suits best.
We say this plainly because it shows up in the price. Mobilisation, access plant and preparation equipment are largely fixed costs, so a single small repair a long way from base carries a much higher rate per square metre than the same work next door to us, or the same work bundled with other defects on one visit. If you have more than one problem on the site, it is worth having them all surveyed at once.
Reviewed by Jerry Blears, Director (LinkedIn), MPS Concrete Solutions. Last reviewed October 2026.
Related injection hose installation projects
Canary Wharf, London Hydrophilic resin injection to stop active water ingress at the abutments of a bascule bridge beside the Jubilee Line exclusion zone.Our Other Services Across County Antrim
Most sites need more than one of these, and it is usually cheaper to have them surveyed together than to mobilise twice.
Industrial Concrete Repairs
Fix cracks, spalling & structural damage
Resin Injection & Crack Sealing
Stop water ingress & seal cracks
Penetration Sealing
Seal pipe & cable penetrations
Cavity Drain Installation
Control basement moisture
External Waterproofing
Protect below-ground structures
Membrane Installation
Waterproof barriers for all surfaces
Send Us Photographs and We'll Tell You What It Is
If it needs a site visit, the survey is free. You get the findings, the cause, and an itemised quotation in writing — the documentation your engineer, insurer or managing agent needs to authorise the works.