Why Concrete Repairs Fail: Reinforcement Corrosion and Anode Protection
A recently approved £137,805 concrete repair scheme at Lingham Primary School in Wirral has highlighted the challenges of dealing with reinforcement corrosion and deteriorating concrete structures.
Wirral Council approved the contract in November 2026 after investigations identified widespread concrete delamination, spalling, chloride contamination and failures of previous repairs. The planned works include an anode protection system intended to help address ongoing corrosion and extend the building's service life.
The case illustrates an important consideration for building owners and asset managers: repairing damaged concrete without addressing the underlying deterioration mechanisms can result in further problems.
What Was Found at Lingham Primary School?
A concrete condition survey at Lingham Primary School identified extensive deterioration affecting the building's concrete structure. The findings included hollow and delaminated concrete, areas of spalling and previous repairs that had failed.
Significant chloride contamination was also identified, particularly around deeper reinforcement levels. This was contributing to the corrosion of embedded steel reinforcement, creating an ongoing maintenance and safety concern.
The survey identified additional defects, including failed movement joints, deteriorated protective coatings and evidence of water ingress into occupied areas of the school.
Following the investigation, Wirral Council approved a 12-week programme of phased concrete repairs and anode protection works, awarding the contract to Quadriga Contracts Ltd.
Why Reinforcement Corrosion Causes Concrete Repairs to Fail
Steel reinforcement is normally protected by the highly alkaline environment within concrete. However, exposure to chlorides or carbonation can compromise this protection, allowing corrosion to develop when sufficient moisture and oxygen are present.
As reinforcement corrodes, the resulting corrosion products occupy more space than the original steel. This expansion creates pressure within the surrounding concrete, potentially causing cracking, delamination and spalling.
A conventional patch repair may remove damaged material and reinstate the concrete surface. However, where corrosion remains active in adjacent areas, further deterioration can occur beyond the repaired section.
This is sometimes referred to as the halo effect or incipient anode formation, where corrosion develops around the boundaries of an otherwise sound repair.
The risk is particularly relevant to ageing reinforced concrete structures exposed to moisture and chloride contamination.
How Anode Protection Can Improve Concrete Repair Performance
Anode protection systems are designed to help control reinforcement corrosion through electrochemical principles.
One approach uses sacrificial galvanic anodes, commonly containing zinc, which are installed within or alongside concrete repairs. These anodes provide protective current to the connected reinforcement and can help reduce corrosion activity in surrounding areas.
Different forms of cathodic protection may be appropriate depending on the condition of the structure, chloride exposure, reinforcement arrangement and required service life.
Anode protection is not necessary for every concrete repair. Its suitability must be established through appropriate investigation and technical design.
For structures experiencing widespread reinforcement corrosion, combining properly specified concrete repairs with suitable corrosion protection measures may provide a more durable solution than isolated patch repairs alone.
Why Investigation Matters Before Repairing Concrete
The findings at Lingham Primary School demonstrate the importance of understanding both visible damage and the conditions contributing to it.
Before specifying repairs, investigations may need to consider the extent of delamination, reinforcement condition, chloride content, carbonation depth and evidence of ongoing water ingress.
Where previous repairs have failed, reviewing the original repair methods and surrounding concrete condition can help identify why deterioration has continued.
Waterproofing, movement joints and protective coatings may also require attention where they contribute to moisture penetration.
For building owners, surveyors and facilities managers, an effective repair strategy should address the underlying deterioration mechanisms rather than focusing solely on the damaged surface.
Specialist Concrete Repair and Corrosion Protection
The Lingham Primary School scheme highlights the importance of correctly diagnosing reinforcement corrosion and selecting repair systems suited to the condition of the structure.
MPS Concrete Solutions provides specialist concrete repair, reinforcement treatment, cathodic protection and structural waterproofing services for commercial, residential and infrastructure projects across the UK.
With 25+ years of combined experience, our team works alongside structural engineers, building surveyors and principal contractors to deliver specified remedial works designed to address concrete deterioration and protect existing structures.
If you require a specialist contractor for concrete repairs or corrosion protection works, contact MPS Concrete Solutions to discuss your project.
Reviewed by Jerry Blears, Director (LinkedIn), MPS Concrete Solutions.
Related Articles
Need Expert Assistance?
Contact our team for specialized waterproofing and concrete repair solutions.