Cavity Drain Installation

CAVITY DRAIN MEMBRANE INSTALLATION IN LONDON

Free site survey, a written diagnosis and a fixed, itemised quotation — for commercial properties in London and Greater London

London sites come to us with basements and below-ground structures that have started to fail. The survey establishes why before anything is specified, and the written diagnosis goes to you with photographs.

How the Work Is Carried Out

Industrial operators keep us on because we understand operational constraints. Works are scheduled around shifts, night and weekend working is normal, and fast-cure sump pump systems is used where the programme calls for it. Serving basements and below-ground structures across Greater London, with ISO 9001, 14001 and 45001 certification behind the paperwork.

Areas We Cover

• Park Royal
• Beckton
• Silvertown
• Enfield
• Croydon
• Tottenham
• Wembley
• Dagenham
• Barking
• Greenwich
• Southall
• Hayes
• Thamesmead
• Abbey Wood
• Woolwich

And across Greater London

Why Choose MPS?

Established 2013, with 25+ years' combined team experience
Sika-approved contractor status
Fast-response service across Greater London
Minimal disruption to operations

Cavity Drain Membrane Systems & Components

We install professional cavity drainage systems using high-performance membranes, channels, and sump pumps to control basement water ingress and dampness.

Studded Drainage Membrane

High-density polyethylene (HDPE) studded membranes create an air gap between damp walls and internal finishes, allowing moisture to drain to collection channels while keeping interiors dry.

Perimeter Drainage Channels

Continuous drainage channels installed at wall-floor junctions collect water from membrane systems, directing it to sump chambers for automatic pump removal.

Sump Pump Systems

Professional submersible sump pumps with battery backup and high-level alarms automatically remove collected water, protecting basements even during power outages.

Floor Membrane Installation

Cavity drain floor membranes with integrated drainage channels manage groundwater pressure beneath basement floors, preventing water rising through concrete slabs.

Membrane Plaster Systems

Breathable water-resistant plasters and boarding systems applied over cavity membranes create fully finished, habitable basement spaces with guaranteed dryness.

Condensation Control

Ventilation systems and dehumidification strategies integrated with cavity drainage to eliminate surface condensation and maintain healthy indoor air quality.

Cavity Drain Installation Process

01

Site Survey & Design

We assess basement condition, water source, floor levels, and drainage fall to design an effective cavity drainage system with optimal sump pump placement.

02

Channel & Sump Installation

Perimeter channels are installed at wall-floor junctions, sump chambers excavated and positioned, and discharge pipework connected to drainage systems or soakaways.

03

Membrane Application

Studded cavity drain membranes are fixed to walls and floors using approved plugs and mastics, creating continuous waterproof barriers with guaranteed drainage paths.

04

Finishing & Certification

Membranes are protected with plasterboard or render systems, sump pumps commissioned and tested, and full installation certificates provided with guarantees.

Frequently Asked Questions

How much does cavity drain installation cost?

Cavity drainage system costs vary based on basement size, ceiling height, number of walls treated, and sump pump requirements. Typical residential basement conversions range from £3,000-£8,000. We provide detailed quotes including all materials, labour, and guarantees.

What's the difference between cavity drainage and tanking?

Tanking creates a waterproof barrier that resists water pressure, requiring perfect seals. Cavity drainage manages water ingress by channelling it safely away, working with water pressure rather than against it. Cavity systems are more forgiving, easier to maintain, and better suited to below-ground applications with high water tables.

Do cavity drain systems need maintenance?

Minimal maintenance is required. We recommend annual sump pump testing, checking discharge pipes are clear, and ensuring drainage channels remain unobstructed. The membrane systems themselves are maintenance-free with 25+ year lifespans when properly installed.

Can you convert a damp basement to habitable space?

Yes, cavity drainage systems are specifically designed for basement conversions. When installed to BS 8102 standards with appropriate ventilation, they create fully dry, habitable spaces suitable for residential or commercial use with insurance-backed guarantees.

What happens if the sump pump fails?

We install sump pumps with battery backup systems that operate during power cuts, and high-level alarms that alert you to pump failure before flooding occurs. Dual pump systems are available for critical applications requiring maximum redundancy.

Concrete in London: Ground, Water and Exposure

Most of London is built on London Clay, a shrink-swell clay that moves with the seasons and is the reason so many London basements and retaining walls crack along construction joints. Along the Thames and the Lea the ground changes to alluvium and river-terrace gravels with a high, tidally influenced water table, so below-ground structures there often sit under a permanent head of water.

Inland and sheltered, so the governing exposure for exposed concrete is XC (carbonation), with XD (de-icing chlorides) on car park decks, ramps and anything beside a salted road. Traffic pollution raises the carbonation rate on older facades, which is why 1960s and 1970s frames across the city are now spalling.

For a cavity drain system it decides the pumping. A basement in alluvium or clay with a high water table will take water continuously and needs a dual-pump sump with battery back-up and an alarm; one in free-draining chalk or sandstone may only ever see percolating rainwater, and the system is sized accordingly.

Exposure classes are those in BS 8500-1 and BS EN 206 (XC carbonation, XD de-icing chlorides, XS marine chlorides, XF freeze-thaw); ground descriptions follow British Geological Survey mapping. The survey confirms which applies to your structure.

Standards, Credentials & Documented Work

What you can check before appointing us.

Standards that govern this work

  • BS 8102:2022 — Type C (drained) protection, including drainage, pump and maintenance-access requirements

Who does the work

MPS Concrete Solutions was founded in 2013 and works from Gamlingay, Cambridgeshire (SG19 3JW). Our operatives hold NVQs in resin and grout injection, CSCS, SSSTS and SMSTS cards, and PASMA and MEWP (3a/3b) training, and are confined-space trained.

  • Constructionline Gold member; SSIP accredited
  • UKAS-accredited certification to ISO 9001, ISO 14001 and ISO 45001
  • Concrete Repair Association (CRA) member
  • Sika-specified applicator

How we get to London

From our yard at Gamlingay in South Cambridgeshire, London is one and a half to two and a half hours. Day-return working on most jobs, which is why we can split works into short phases around your occupancy instead of taking an area out for a fortnight.

We say this plainly because it shows up in the price. Mobilisation, access plant and preparation equipment are largely fixed costs, so a single small repair a long way from base carries a much higher rate per square metre than the same work next door to us, or the same work bundled with other defects on one visit. If you have more than one problem on the site, it is worth having them all surveyed at once.

Reviewed by Jerry Blears, Director (LinkedIn), MPS Concrete Solutions. Last reviewed October 2026.

Our work in London

The Dumont, Albert Embankment, London Internal cementitious render to a PUDLO waterproof-concrete attenuation tank for St James Group, working in confined space; turned around in three days. Sterling Court, North London Podium deck and soffit remediation: breakout of defective concrete, re-levelling and a waterproofing system above occupied areas. Bromley South Central, London New expansion joint system and patch repairs to a multi-level car park, phased to keep it operational. Project George, Oxford Circus, London Basement cavity drain installation for LDD Construction at 100–140m² a day, finished in under five weeks against competitor quotes of eight or more. The Ridgeway, Mill Hill Waterproofing a long run of 20mm movement joints on a podium deck over a basement car park, under a 20-year PUDLO warranty. Canary Wharf, London Hydrophilic resin injection to stop active water ingress at the abutments of a bascule bridge beside the Jubilee Line exclusion zone.

All case studies →

Send Us Photographs and We'll Tell You What It Is

If it needs a site visit, the survey is free. You get the findings, the cause, and an itemised quotation in writing — the documentation your engineer, insurer or managing agent needs to authorise the works.