Resin Injection Crack Sealing

RESIN INJECTION & CONCRETE CRACK REPAIR IN LONDON

Free site survey, a written diagnosis and a fixed, itemised quotation — for structural cracks in concrete walls and floors across the London area

Fast, effective work on structural cracks in concrete walls and floors across London and the wider Greater London area, with the programme phased around how the site actually runs.

How the Work Is Carried Out

Industrial operators keep us on because we understand operational constraints. Works are scheduled around shifts, night and weekend working is normal, and fast-cure polyurethane injection is used where the programme calls for it. Serving structural cracks in concrete walls and floors across Greater London, with ISO 9001, 14001 and 45001 certification behind the paperwork.

Areas We Cover

• Park Royal
• Beckton
• Silvertown
• Enfield
• Croydon
• Tottenham
• Wembley
• Dagenham
• Barking
• Greenwich
• Southall
• Hayes
• Thamesmead
• Abbey Wood
• Woolwich

And across Greater London

Why Choose MPS?

Established 2013, with 25+ years' combined team experience
Sika-approved contractor status
Fast-response service across Greater London
Minimal disruption to operations

Resin Injection & Crack Sealing Techniques

We use advanced crack injection resins and proven sealing methods to permanently repair structural cracks in concrete walls, floors, and foundations.

Low-Viscosity Epoxy Injection

For static structural cracks, we inject ultra-low viscosity epoxy deep into hairline fractures, creating a permanent structural bond stronger than the original concrete. Ideal for basement walls and structural elements.

Polyurethane Crack Injection

For active water leaks and moving cracks, we use expanding polyurethane resins that seal and flex with structural movement, stopping water ingress immediately in wet conditions.

Surface Crack Routing

Mechanical cutting and preparation of crack edges to create clean channels for resin injection, ensuring maximum penetration and long-term structural bonding.

Injection Port Installation

Precision placement of injection ports along crack lines, allowing controlled resin flow from the deepest point upwards, ensuring complete crack filling and structural integrity.

Flexible Sealant Systems

Application of movement-tolerant polyurethane and polysulphide sealants for expansion joints and dynamic cracks, maintaining waterproof seals while accommodating thermal movement.

Passive Resin Curtains

Installation of passive hydrophilic resin curtains that expand on contact with water, creating permanent waterproof barriers in damp basement walls and retaining structures.

Crack Injection & Sealing Process

01

Crack Assessment

We inspect cracks to determine type (structural/non-structural), movement (static/active), water presence, and depth. This determines whether epoxy or polyurethane injection is required.

02

Preparation & Porting

Cracks are routed, cleaned, and injection ports installed at intervals along the crack line. Surfaces are dried (for epoxy) or dampened (for polyurethane) as required.

03

Resin Injection

Low-viscosity epoxy or expanding polyurethane is pressure-injected through ports, starting from the lowest point. Resin flows through the entire crack until fully saturated.

04

Curing & Finishing

After curing (2-24 hours depending on resin type), injection ports are removed, surfaces are ground flush, and optional protective coatings applied for a seamless finish.

Frequently Asked Questions

How much does crack injection cost?

Crack injection costs vary based on crack length, depth, accessibility, and resin type required (epoxy or polyurethane). Typical residential basement crack repairs range from £400-£1,200, while commercial structural crack repairs vary based on scale. Contact us for a detailed quote.

What's the difference between epoxy and polyurethane injection?

Epoxy injection creates a rigid structural bond for static cracks in dry conditions, restoring full concrete strength. Polyurethane injection is flexible, expands in water, and works in wet conditions for active leaks and moving cracks. We select the appropriate resin based on your specific crack conditions.

How long does crack injection resin take to cure?

Low-viscosity epoxy resins typically cure within 24-48 hours. Polyurethane resins cure faster (2-6 hours) and react on contact with water. Full structural strength is achieved within 7 days for most crack injection systems.

Can you inject cracks that are actively leaking?

Yes, we use hydrophobic polyurethane resins specifically designed for wet conditions. These resins react with water, expanding to create a permanent waterproof seal even during active leaks. Epoxy injection requires dry conditions.

Is crack injection a permanent repair?

When properly specified and installed, crack injection provides a permanent structural repair. Epoxy-injected cracks are often stronger than the original concrete. The key is correctly diagnosing crack movement and selecting the appropriate resin system (rigid epoxy for static cracks, flexible polyurethane for moving cracks).

Concrete in London: Ground, Water and Exposure

Most of London is built on London Clay, a shrink-swell clay that moves with the seasons and is the reason so many London basements and retaining walls crack along construction joints. Along the Thames and the Lea the ground changes to alluvium and river-terrace gravels with a high, tidally influenced water table, so below-ground structures there often sit under a permanent head of water.

Inland and sheltered, so the governing exposure for exposed concrete is XC (carbonation), with XD (de-icing chlorides) on car park decks, ramps and anything beside a salted road. Traffic pollution raises the carbonation rate on older facades, which is why 1960s and 1970s frames across the city are now spalling.

For crack injection it decides the resin. A crack carrying water from a high water table needs a water-reactive polyurethane that will cure in the wet; a dry, dormant crack in a frame that has stopped moving can take a rigid epoxy; and a crack caused by ground movement needs an engineer to say whether it has finished moving before anything is injected into it.

Exposure classes are those in BS 8500-1 and BS EN 206 (XC carbonation, XD de-icing chlorides, XS marine chlorides, XF freeze-thaw); ground descriptions follow British Geological Survey mapping. The survey confirms which applies to your structure.

Standards, Credentials & Documented Work

What you can check before appointing us.

Standards that govern this work

  • BS EN 1504-5 — concrete injection products for force-transmitting, ductile and swelling crack filling
  • BS 8102:2022 — protection of below-ground structures against water ingress, where the crack is in a basement or retaining wall

Who does the work

MPS Concrete Solutions was founded in 2013 and works from Gamlingay, Cambridgeshire (SG19 3JW). Our operatives hold NVQs in resin and grout injection, CSCS, SSSTS and SMSTS cards, and PASMA and MEWP (3a/3b) training, and are confined-space trained.

  • Constructionline Gold member; SSIP accredited
  • UKAS-accredited certification to ISO 9001, ISO 14001 and ISO 45001
  • Concrete Repair Association (CRA) member
  • Sika-specified applicator

How we get to London

From our yard at Gamlingay in South Cambridgeshire, London is one and a half to two and a half hours. Day-return working on most jobs, which is why we can split works into short phases around your occupancy instead of taking an area out for a fortnight.

We say this plainly because it shows up in the price. Mobilisation, access plant and preparation equipment are largely fixed costs, so a single small repair a long way from base carries a much higher rate per square metre than the same work next door to us, or the same work bundled with other defects on one visit. If you have more than one problem on the site, it is worth having them all surveyed at once.

Reviewed by Jerry Blears, Director (LinkedIn), MPS Concrete Solutions. Last reviewed October 2026.

Our work in London

The Dumont, Albert Embankment, London Internal cementitious render to a PUDLO waterproof-concrete attenuation tank for St James Group, working in confined space; turned around in three days. Sterling Court, North London Podium deck and soffit remediation: breakout of defective concrete, re-levelling and a waterproofing system above occupied areas. Bromley South Central, London New expansion joint system and patch repairs to a multi-level car park, phased to keep it operational. Project George, Oxford Circus, London Basement cavity drain installation for LDD Construction at 100–140m² a day, finished in under five weeks against competitor quotes of eight or more. The Ridgeway, Mill Hill Waterproofing a long run of 20mm movement joints on a podium deck over a basement car park, under a 20-year PUDLO warranty. Canary Wharf, London Hydrophilic resin injection to stop active water ingress at the abutments of a bascule bridge beside the Jubilee Line exclusion zone.

Related crack sealing projects

Center Parcs Sherwood Forest, Nottinghamshire Leak repair and concrete remediation to the wave-pool balance tanks, completed in full PPE under pandemic restrictions.

All case studies →

Send Us Photographs and We'll Tell You What It Is

If it needs a site visit, the survey is free. You get the findings, the cause, and an itemised quotation in writing — the documentation your engineer, insurer or managing agent needs to authorise the works.