External Waterproofing

STRUCTURAL WATERPROOFING & TANKING IN LONDON

Free site survey, a written diagnosis and a fixed, itemised quotation — for commercial properties in London and Greater London

Durable, long-life results on building foundations and retaining walls across London, using high-performance liquid waterproofing products and a written specification you can hold us to.

How the Work Is Carried Out

Works on building foundations and retaining walls are phased so the building keeps operating: areas are handed over in sections, access equipment is moved rather than left standing, and fast-cure materials are used where the programme is tight. You get a method statement and a risk assessment before anyone arrives on site.

Areas We Cover

• Park Royal
• Beckton
• Silvertown
• Enfield
• Croydon
• Tottenham
• Wembley
• Dagenham
• Barking
• Greenwich
• Southall
• Hayes
• Thamesmead
• Abbey Wood
• Woolwich

And across Greater London

Why Choose MPS?

Established 2013, with 25+ years' combined team experience
Sika-approved contractor status
Fast-response service across Greater London
Minimal disruption to operations

Barrier & Tanking Systems

We apply membranes and tanking to the outside face of below-ground structures, stopping groundwater before it reaches the concrete (Type A protection under BS 8102).

Liquid Applied Membranes

Cold-applied liquid waterproofing systems that cure to form seamless, flexible barriers. Ideal for complex details, penetrations, and irregular surfaces on retaining walls and basement exteriors.

Sheet Membrane Systems

High-performance HDPE and bituminous sheet membranes mechanically fixed or torch-applied to below-ground walls, providing robust protection against hydrostatic water pressure.

Cementitious Tanking

Polymer-modified cement-based waterproofing slurries applied to external foundation walls, creating crystalline barriers that resist water pressure while remaining breathable.

Drainage Composites

Geocomposite drainage boards installed over waterproofing membranes to channel groundwater safely to perimeter drains, reducing hydrostatic pressure on basement walls.

Perimeter Land Drains

French drain systems with perforated pipes and gravel surrounds installed at foundation level, collecting and diverting groundwater away from structures before it can penetrate walls.

Structural Waterproofing

Integrated waterproofing strategies combining external membranes, drainage layers, and structural protection boards to BS 8102 Grade 3 standards for critical applications.

Waterproofing the outside face only works where the concrete behind it is sound. Where the wall or footing is already cracked, spalling, or has been softened by sulfate attack, that has to be reinstated before any membrane goes on — our concrete foundation repair page sets out how each foundation type fails and how the defect is diagnosed. Where excavation is ruled out by access, services or an adjoining structure, the same wall is normally sealed from the inside instead; basement tanking costs gives indicative pricing for that route.

How the Installation Is Carried Out

01

Excavation & Exposure

Existing ground is excavated adjacent to foundation walls to expose below-ground surfaces. Temporary shoring installed if required for safety and access.

02

Surface Preparation

Walls are cleaned, defects repaired with cementitious mortars, sharp edges removed, and surfaces primed to receive waterproofing membranes according to manufacturer specifications.

03

Membrane Application

Waterproofing membranes are applied from footing level upwards with proper overlaps, sealed joints, and protection at penetrations. Drainage layers added over membranes.

04

Drainage & Backfill

Perimeter land drains installed at footing level, protection boards fixed over membranes, and excavations backfilled with free-draining granular material to prevent water accumulation.

Frequently Asked Questions

How much does external waterproofing cost?

External waterproofing costs depend on wall height, excavation depth, membrane type, access constraints, and drainage requirements. Typical residential basement waterproofing ranges from £150-£250 per linear metre including excavation and reinstatement. Commercial projects vary based on scale and specification.

When is external waterproofing better than internal solutions?

Applying the barrier externally is generally the preferred option as it stops water before it enters the structure, protects the concrete itself, and doesn't reduce internal space. It's essential for new builds and recommended when excavation is already required for other works. Internal systems are more practical for existing buildings where excavation is prohibitively expensive.

How long does external waterproofing last?

When properly installed with appropriate protection and drainage, manufacturers typically state design lives of 25-50+ years for these systems. Sheet membranes and liquid-applied systems backed by manufacturer guarantees typically last the lifetime of the structure when correctly specified and installed.

Can external waterproofing be added to existing buildings?

Yes, it can be retrofitted to existing buildings through excavation alongside walls. This is often combined with underpinning, foundation repairs, or basement conversions to maximise value from the excavation works. Access and adjacent structures must be considered during design.

Do I need land drains with external waterproofing?

Perimeter land drains are highly recommended alongside an external membrane. They reduce hydrostatic water pressure against walls by channelling groundwater away before it can accumulate. This dramatically improves membrane longevity and system effectiveness, especially in high water table conditions.

Concrete in London: Ground, Water and Exposure

Most of London is built on London Clay, a shrink-swell clay that moves with the seasons and is the reason so many London basements and retaining walls crack along construction joints. Along the Thames and the Lea the ground changes to alluvium and river-terrace gravels with a high, tidally influenced water table, so below-ground structures there often sit under a permanent head of water.

Inland and sheltered, so the governing exposure for exposed concrete is XC (carbonation), with XD (de-icing chlorides) on car park decks, ramps and anything beside a salted road. Traffic pollution raises the carbonation rate on older facades, which is why 1960s and 1970s frames across the city are now spalling.

For external waterproofing it decides the grade and the combination. A retaining wall or basement under a permanent head of water needs the system designed to BS 8102:2022 for that head, usually as combined protection, while one in free-draining ground can rely on a single barrier; and a shrink-swell clay means the structure will move, so the membrane has to tolerate it.

Exposure classes are those in BS 8500-1 and BS EN 206 (XC carbonation, XD de-icing chlorides, XS marine chlorides, XF freeze-thaw); ground descriptions follow British Geological Survey mapping. The survey confirms which applies to your structure.

Standards, Credentials & Documented Work

What you can check before appointing us.

Standards that govern this work

  • BS 8102:2022 — Type A (barrier) protection, water-table assessment and the choice of combined systems

Who does the work

MPS Concrete Solutions was founded in 2013 and works from Gamlingay, Cambridgeshire (SG19 3JW). Our operatives hold NVQs in resin and grout injection, CSCS, SSSTS and SMSTS cards, and PASMA and MEWP (3a/3b) training, and are confined-space trained.

  • Constructionline Gold member; SSIP accredited
  • UKAS-accredited certification to ISO 9001, ISO 14001 and ISO 45001
  • Concrete Repair Association (CRA) member
  • Sika-specified applicator

How we get to London

From our yard at Gamlingay in South Cambridgeshire, London is one and a half to two and a half hours. Day-return working on most jobs, which is why we can split works into short phases around your occupancy instead of taking an area out for a fortnight.

We say this plainly because it shows up in the price. Mobilisation, access plant and preparation equipment are largely fixed costs, so a single small repair a long way from base carries a much higher rate per square metre than the same work next door to us, or the same work bundled with other defects on one visit. If you have more than one problem on the site, it is worth having them all surveyed at once.

Reviewed by Jerry Blears, Director (LinkedIn), MPS Concrete Solutions. Last reviewed October 2026.

Our work in London

The Dumont, Albert Embankment, London Internal cementitious render to a PUDLO waterproof-concrete attenuation tank for St James Group, working in confined space; turned around in three days. Sterling Court, North London Podium deck and soffit remediation: breakout of defective concrete, re-levelling and a waterproofing system above occupied areas. Bromley South Central, London New expansion joint system and patch repairs to a multi-level car park, phased to keep it operational. Project George, Oxford Circus, London Basement cavity drain installation for LDD Construction at 100–140m² a day, finished in under five weeks against competitor quotes of eight or more. The Ridgeway, Mill Hill Waterproofing a long run of 20mm movement joints on a podium deck over a basement car park, under a 20-year PUDLO warranty. Canary Wharf, London Hydrophilic resin injection to stop active water ingress at the abutments of a bascule bridge beside the Jubilee Line exclusion zone.

Related external waterproofing projects

Hilsea Lido, Portsmouth Full Sika waterproof coating system across the pool shell — walls, floor, ramps and curved transitions — with lane markings reinstated.

All case studies →

Send Us Photographs and We'll Tell You What It Is

If it needs a site visit, the survey is free. You get the findings, the cause, and an itemised quotation in writing — the documentation your engineer, insurer or managing agent needs to authorise the works.